Exam
Digital badge or certificate: what is the difference, and how is each verified?
A certificate is a document that a person reads. A digital badge under the Open Badges 3.0 standard is a data record of one achievement, packaged as a verifiable credential that software checks against the issuer's cryptographic proof. Open Badges 3.0 follows the W3C Verifiable Credentials Data Model 2.0, a W3C Recommendation since May 15, 2025. A badge records who issued it, to whom, for what, and when its validity starts and ends.

What is the difference between a digital badge and a certificate?
A certificate is a document for people. An Open Badge is a structured record of one achievement that software can check for authenticity and status. Both can describe the same achievement and lead to the same issuer record.
The Open Badges specification of 1EdTech defines a badge in its glossary as "A single assertion of an achievement that is packaged as a verifiable credential." The core type is the AchievementCredential, "a Verifiable Credential that makes the claim that a subject (usually a learner), has met criteria." The claim "must contain a single Credential Subject which identifies the recipient of the Open Badge."
A badge usually has a picture, but the picture is not the badge. The implementation guide says: "Images are optional but are visually prominent components of badges and are often included." What a verifier checks is the data and the proof attached to it.
A certificate on paper or in PDF carries the same facts in text: the holder, the issuer, the achievement and the dates. To check it, the reader goes to the issuer. The Federal Trade Commission, in its January 2005 guidance for employers, advised checking academic credentials directly with the school, because some diploma mills run a "verification service" that will "send a phony transcript to a prospective employer who calls." The FTC notes that "Most college registrars will confirm dates of attendance and graduation" on request, and advises: "don't stop your research just because someone answers your questions on the phone or responds with a letter."
The two formats often exist side by side. An issuer can publish a registry record, a PDF certificate and a badge for the same result, and each of them leads back to the issuer's record.
What is Open Badges 3.0?
A 1EdTech specification for digital badges. The final release adopts the conventions of the W3C Verifiable Credentials Data Model v2.0 and renames the Open Badges 2.0 Assertion to AchievementCredential.
The specification page describes the document as "Final Release Spec Version 3.0," with document version 1.4.5 issued on June 29, 2026, made available for adoption by the public community at large. Version 3.0 changed the structure of the assertion "to adopt the conventions of the Verifiable Credentials Data Model v2.0."
The implementation guide, document version 2.1 issued on June 15, 2026, describes three changes. The object that Open Badges 2.0 called "Assertion" is now the AchievementCredential. Issuer profiles are no longer required to use HTTP IDs. Integrity verification "is assumed to occur at the Verifiable Credentials Data Model level only."
The specification refers to a separate document, the Open Badges Specification Conformance and Certification Guide v3.0. Under section 1.3 of the specification, an implementation that fails to implement a MUST, REQUIRED or SHALL requirement is "considered nonconformant."
For a verifier this means that the integrity check of a 3.0 badge runs on the proof contained in the credential.
What is a verifiable credential?
Under the W3C Recommendation of May 15, 2025, it is a tamper-evident credential whose authorship can be cryptographically verified. The model has three roles: the issuer, the holder and the verifier.
The W3C Verifiable Credentials Data Model v2.0 was published by the Verifiable Credentials Working Group as a W3C Recommendation on May 15, 2025. It defines a verifiable credential as "A tamper-evident credential whose authorship can be cryptographically verified."
The issuer is the role of "asserting claims about one or more subjects, creating a verifiable credential" and sending it to a holder. The holder is the role of "possessing one or more verifiable credentials and generating verifiable presentations" from them. The verifier receives one or more verifiable credentials, optionally inside a verifiable presentation. A fourth element, the verifiable data registry, mediates the creation and verification of identifiers and verification material.
A presentation is "Data derived from one or more verifiable credentials issued by one or more issuers," shared with a specific verifier. One presentation can combine credentials from several issuers, and the verifier checks each credential in it.
What does a digital badge contain?
The issuer, the recipient, the achievement with its name, description and criteria, the validity dates and a proof. It can also contain evidence and a status entry that tells a verifier whether the badge was suspended or revoked.
The achievement is described by its name, description and criteria. In the specification's sample credential the criteria are an object with a narrative field, a text that says what the learner had to do to earn the badge. The specification notes that these descriptive properties may be shared with the Comprehensive Learner Record (CLR).
Evidence is defined as "Information supporting a claim such as a URL to an artifact produced by the Learner." In the implementation guide, the award record can store "what the educator may have entered in an evidence narrative text box."
The dates come from the W3C model. The validFrom property gives the moment when the credential "becomes valid," which may be before or after the current time. The validUntil property gives "the date and time the credential ceases to be valid." The examples in Open Badges 3.0 use validFrom.
The status entry is the credentialStatus property. Under the W3C model it is used for "discovering information related to the status of a verifiable credential, such as whether it is suspended or revoked." The W3C text gives the type BitstringStatusListEntry as an example.
How is a digital badge verified?
Software checks the proof attached to the badge, the validity dates and, if the badge has a status entry, the status. Whether to trust the issuer is the verifier's own decision under the specification.
Open Badges 3.0 defines verification as the evaluation of whether a verifiable credential is authentic and timely. The checks include the proof and, "if present, the status check succeeds." The specification names two proof formats: a JWT-based proof under section 8.2 (VC-JWT) and a Linked Data Proof under section 8.3.
The implementation guide says that wallets and credential verifiers "will primarily focus on verifying the integrity of the proof on each credential." If the badge indicates a refresh endpoint, "The 1EdTech verifier tools will request updated version."
A valid proof answers only one question: the issuer named in the badge did issue it, and nobody changed it afterwards. The specification states that verifiers should make sure they trust a particular credential's issuer. The W3C model says it directly: "Verifiability of a credential does not imply the truth of claims encoded therein." Verifiers "validate the included claims using their own business rules before relying on them."
Can a digital badge expire or be revoked?
Yes. A badge can carry an end date in validUntil, and the issuer can mark it as revoked or suspended through the credentialStatus property, which the verifier checks against a published status list.
Expiry is built into the data. If the issuer sets validUntil, a verifier that runs the check after that date sees that the credential has ceased to be valid. For a certificate with a fixed term, validUntil is the field that carries the end of the term.
Revocation goes through the status entry. The Open Badges 3.0 specification describes a use case in which the issuer uses "the credentialStatus property" to reference a revocation list. The implementation guide states that "The ability to mark a credential as revoked is an important capability for many organizations," and that a status list "enables verifiers to efficiently query for status results."
A paper or PDF certificate cannot change after it is printed. If the issuer revokes it, the document still shows the original dates. Only the issuer's registry or a status check shows the current state, so a verifier who relies on the document alone does not learn of the revocation.
Where is a digital badge kept, and how is it shared?
In a badge backpack, a mobile wallet or a host platform. The holder shares it with an employer or a client, alone or inside a verifiable presentation that combines several credentials.
The implementation guide mentions several places to keep badges. Some issuers "allow learners to rely on badge backpacks or mobile wallets to provide sharing capabilities," and the same capabilities "might be available within an Open Badges Host platform."
Under the W3C model the holder is the party that creates a verifiable presentation. The holder decides which credentials go to which verifier: an employer, a client or a professional association. The verifier receives the presentation and checks each credential in it.
Does a badge or a certificate prove that the holder is qualified?
It proves who issued the record and what the record says. Whether the issuer tested anything is a separate question. The FTC describes diploma mills that sell degrees or certificates without requiring more than a fee.
The FTC's 2005 guidance for employers describes diploma mills as companies that sell "degrees" or certificates on the Internet "without requiring the buyer to do anything more than pay a fee." A certificate from such a company can be issued as a PDF, printed on paper or packaged as a badge with a valid proof.
The FTC lists warning signs on a résumé and on a school's website. On a résumé they include an advanced degree without a bachelor's degree, "A degree earned in a very short time, or several degrees listed for the same year," and names that sound or look like those of well-known colleges. On a website they include tuition "charged on a per-degree basis, rather than per credit, course, or semester," few or no degree requirements and degrees for work or life experience.
For degrees the FTC recommends checking accreditation through the Department of Education database of accredited institutions and the list of recognized accrediting agencies published by CHEA, and it warns that a bogus accrediting agency can sound official. It also advises asking the applicant for proof of the degree and of the school's accreditation, including a certified transcript. It adds: "Ultimately, it's up to the applicant to show that he earned his credentials from a legitimate institution."
For a professional certificate the equivalent questions concern the issuer's rules: whether admission requires documented education and experience, whether the exam is graded against a published rubric, how long the certificate is valid and whether the issuer publishes revocations.
How is the IAE Certified Professional certificate verified?
Through its record in the public IAE registry. The record shows the certificate number, program, exam date, validity and status, the QR code on the certificate leads to it, and the certificate badge shows Not valid after expiry or revocation.
The IAE exam leads to an IAE Certified Professional (IAE-CP) certificate that states the field, is valid for 3 years and comes with a record in the public registry. The exam page states: "Any employer can verify a numbered certificate in the IAE registry." The certificate is issued after the Secretariat compares the candidate's ID photo with the camera picture.
The registry record of a certificate shows the certificate number, the program and its version, the exam date, the validity and the status, and offers the certificate as a PDF. The QR code on the certificate leads to the same record. If the data differ from the specialist's documents, the record page asks the reader to write to the Secretariat. The certificate shows no percentage: it records the result, that the exam in the field was passed. The total, the scores by section and the scores by the criteria of each task are in the score report, which goes to the candidate. If a company assigned the exam, it sees the total, the criterion scores and the certificate, and the candidate confirms this before the exam starts.
The record page also offers an IAE-CP certificate badge for a website and an email signature. The badge links to the record and shows whether the certificate is valid; if it has expired or been revoked, the badge shows "Not valid". The page states that the badge follows the Open Badges 2.0 format, that the PNG file can be added to a digital badge wallet and that it is verified against the record in the IAE registry.
Under the exam terms, the certificate is valid for 3 years from the exam date. Renewal requires a new exam under the current program or 60 hours of professional development over 3 years, and the Secretariat audits 10% of the declarations at random. A renewal request is accepted no earlier than 6 months before expiry. The candidate's answers and the typing log are kept for 3 years, the validity of the certificate, and then deleted. Without renewal the record is marked "expired"; after a violation the certificate is revoked and marked "revoked". IAE membership is not required for the exam, and IAE does not promise that the certificate will affect a USCIS decision.
Sources
- 1EdTech, Open Badges Specification, Final Release Spec Version 3.0, document version 1.4.5, June 29, 2026
- 1EdTech, Open Badges 3.0 Implementation Guide, document version 2.1, June 15, 2026
- W3C, Verifiable Credentials Data Model v2.0, W3C Recommendation, May 15, 2025
- Federal Trade Commission, Avoid Fake-Degree Burns By Researching Academic Credentials, January 2005
Read also
All articles
How many times can you retake a certification exam, and how long do you wait between attempts?
Every certification body writes its own retake rule. AWS and The Open Group set no cap on attempts, Microsoft permits five in 12 months, PMI three
Do professional certifications expire, and how does recertification work?
Most professional certifications are issued for a fixed period, often three years, and renewed through continuing education or a new exam. ASQ, NICET
Can a professional certification count as degree equivalency for an H-1B?
Yes, in one narrow way. Under 8 CFR 214.2(h)(4)(iii)(D)(4), certification or registration from a nationally-recognized professional association
Book the exam
The questionnaire takes 15 minutes. Admission decision in 1 business day, exam on any of 14 days.
