Exam
ISO/IEC 17024 personnel certification: what does the standard require, and who checks it?
ISO/IEC 17024 sets requirements for organizations that certify people: how they build a certification scheme, run exams, issue certificates, recertify, and handle appeals and complaints. The third edition was published in March 2026 and replaced the 2012 text. In the US, accreditation bodies such as ANAB check certification bodies against the standard, and DoD Manual 8140.03 requires personnel certifications used for DoD cyber work roles to be accredited to it.

What is ISO/IEC 17024?
An international standard of requirements for bodies that certify persons. It certifies no one itself: a certification body follows it, and an accreditation body checks whether the certification body meets it.
Clause 1 of the 2012 edition states that the standard "contains principles and requirements for a body certifying persons against specific requirements." The standard is addressed to the certification body. A person who passes that body's exam receives the body's certificate.
The foreword of the 2012 text states that this second edition, dated July 1, 2012, cancels and replaces the first edition, ISO/IEC 17024:2003. According to the preview of ISO/IEC 17024:2026, the third edition "cancels and replaces the second edition (ISO/IEC 17024:2012), which has been technically revised." The IAS transition policy dates the new edition to March 2026.
The introduction to the 2026 text gives the purpose in one sentence: "Certification of persons is one means of providing assurance that the certified person meets the requirements identified in the certification scheme."
Is the person "ISO 17024 certified", or the organization?
The person holds a certification issued by a certification body. The body is the one accredited to ISO/IEC 17024, and the standard defines a certificate as a document that such a body issues under its provisions.
The 2012 text defines the certification process as the activities by which a certification body determines that a person fulfils certification requirements. A certificate is a "document issued by a certification body under the provisions of this International Standard." Competence is the "ability to apply knowledge and skills to achieve intended results."
DoD Manual 8140.03 attaches the word accredited to the certification: "Personnel certifications must be accredited" to ISO/IEC 17024. The person who passes the exam holds an accredited certification.
Course certificates sit in a separate program. On its credentialing page ANAB lists two kinds of accredited organizations: personnel certification bodies and certificate issuers. ANAB describes its ANSI/ASTM E2659 training as meant for any organization that issues "certificates" based on a training or education course.
What is a certification scheme?
The competence and other requirements for a specific occupation or skilled category, together with the rules for initial certification, surveillance, recertification and withdrawal. The standard requires the scheme to rest on a job or practice analysis.
The 2012 text defines a certification scheme by its content: competence and other requirements related to specific occupational or skilled categories of persons. Under clause 8.2 a scheme contains the scope of certification, a job and task description, the required competence and, where relevant, abilities, prerequisites and a code of conduct.
Clause 8.3 adds the process rules each scheme must state: criteria and methods for initial certification and for recertification, surveillance methods and criteria, criteria for suspending and withdrawing certification, and criteria for changing its scope or level.
The content comes from a job or practice analysis. The body conducts it and updates it to identify the tasks, the competence for each task, the prerequisites, the assessment mechanisms and the recertification requirements. The scheme is then "reviewed and validated on an ongoing, systematic basis."
ANSI describes the same rule from the accreditor's side: competencies are set "using an empirically derived process such as job/practice analysis," and the ANSI blog adds that "The certification examination must be fair, valid, and reliable."
What does ISO/IEC 17024 require of the exam and the examiners?
Exams must be designed to assess competence based on the scheme, administered consistently and checked at set intervals for fairness, validity, reliability and performance. Examiners must be competent in the field examined.
Clause 9.3.1 of the 2012 text requires examinations "designed to assess competence based on, and consistent with, the scheme." Clause 9.3.2 asks for procedures that give "a consistent examination administration." Under 9.3.5 the fairness, validity, reliability and performance of examinations are reaffirmed at defined intervals. Under 9.3.4 technical equipment used in an exam is verified or calibrated where appropriate.
The standard separates the exam from the wider assessment. It defines an examination as a mechanism within the assessment that measures a candidate's competence, and an examiner as a person competent to conduct and score an examination where the examination requires professional judgement.
Under clause 6.2.2 examiners must be able to apply the examination procedures and documents and "have competence in the field to be examined." The certification body monitors "the performance of the examiners and the reliability of the examiners' judgements."
Special needs of candidates are accommodated "within reason" under clause 9.2.5. Clause 9.2.2 deals with changes in a scheme that require additional assessment of persons already certified.
Can the same organization train and certify candidates?
The 2012 text says that offering training and certification for persons within the same legal entity constitutes a threat to impartiality. It also lets a certification scheme make completed training a requirement.
Clause 4.3.2 reads: "The certification body shall act impartially in relation to its applicants, candidates and certified persons." Under 4.3.1 the body publishes a statement on impartiality.
Clause 5.2.1 states that "Completion of training may be a specified requirement of a certification scheme." Clause 5.2.3 adds: "Offering training and certification for persons within the same legal entity constitutes a threat to impartiality."
The 2026 edition keeps a clause titled Structure of the certification body in relation to education or training. A candidate who buys a preparation course from the certifying body can ask the body for its impartiality statement, which the body publishes under 4.3.1.
What must an ISO/IEC 17024 certificate contain?
At least six items: the person's name, a unique identification, the certification body's name, the scheme reference, the scope with any validity conditions, and the effective and expiry dates.
Clause 9.4.6 says that "Certification shall not be granted until all certification requirements are fulfilled." Under 9.4.7 every certified person receives a certificate. Clause 9.4.8 lists its minimum content, and the list includes "the scope of the certification including, if applicable, validity conditions and limitations." Under 9.4.9 the certificate is "designed to reduce the risks of counterfeiting."
Verification is a public duty of the body. On request it states "whether an individual holds a current, valid certification" (clause 7.2.1). The scope of each scheme and a general description of the certification process are available "without request" (clause 7.2.2).
Where the body provides a mark or logo, it documents the conditions for its use. Each certified person signs an agreement with the body, which includes a promise not to use the certificate in a misleading manner (clause 9.7).
How long does certification last, and when is it withdrawn?
The scheme sets the period. The 2012 text requires a recertification process that confirms continued competence, criteria for suspension and withdrawal, and documented processes for appeals and complaints.
Clause 9.6 reads: "The recertification period shall be based upon the scheme requirements." Recertification confirms continued competence through an impartial assessment. The methods listed include on-site assessment, professional development, structured interviews, records of work, examination and checks of physical capability.
Between recertifications a scheme may provide for surveillance, defined as "periodic monitoring, during the periods of certification, of a certified person's performance." Under clause 9.5 a person who fails to resolve the issues that led to a suspension has the certification withdrawn or its scope reduced.
Appeals and complaints follow written procedures. Under 9.8.4 "The certification body shall be responsible for all decisions at all levels of the appeals-handling process." Under 9.9.1 the body has "a documented process to receive, evaluate and make decisions on complaints."
What changed in ISO/IEC 17024:2026?
The foreword lists three changes: added or revised terms and definitions, new requirements on the use of artificial intelligence in clause 6.5, and alignment with the PROC/33 text that sets common elements for CASCO standards.
The table of contents of the 2026 text has a new clause titled Use of artificial intelligence (AI) in the certification process. The other clauses cover certification schemes, the application, the examination, the decision, suspension and withdrawal, recertification, use of certificates and marks, appeals, complaints and the management system.
ANAB announced on April 8, 2026 that ISO/IEC 17020:2026 and ISO/IEC 17024:2026 were available for purchase. ANAB noted that both standards were last revised in 2012.
The IAS transition policy dated August 17, 2026 gives the deadline. The 36-month transition period set by the Global Accreditation Cooperation (Global ACI) runs between March 27, 2026 and March 27, 2029. After that date accreditation to ISO/IEC 17024:2012 "will no longer be recognized" under the Global ACI Multi-lateral Arrangement. IAS suspends the accreditation of a body that has not transitioned by March 27, 2029, and cancels it if the suspension is not lifted within six months.
Who accredits personnel certification bodies?
Accreditation bodies, among them ANAB and IAS. In a 2024 survey of 49 accreditation bodies by the International Accreditation Forum, ANAB had accredited the largest number of certification bodies, 90.
On its national recognition page ANAB states that its program "operates in compliance with ISO/IEC 17011, and applies ISO/IEC 17024." The same page names ANAB as "the sole approved accreditor of personnel certification bodies by the DoD" for the DoD Information Assurance Workforce Improvement Program.
The ANSI blog reported the results of an International Accreditation Forum survey launched in April 2024. Of the 49 accreditation bodies that answered, 80% had accredited 10 or fewer certification bodies, and ANAB had the highest number, 90. In another post, on ISO/IEC 17024 and credentialing, ANSI writes that "More than 40 agencies worldwide accredit personnel certification bodies based on ISO/IEC 17024."
A candidate can check a certification in two places: the accreditor's list of accredited bodies, and the certification body itself, which under clause 7.2.1 confirms on request whether a person holds a current, valid certification. ANAB's credentialing page links to lists of accredited Personnel Certification Bodies and Certificate Issuers.
Does any US law require ISO/IEC 17024 accreditation?
Some federal programs do. DoD Manual 8140.03 requires personnel certifications used for DoD cyber work roles to be accredited to ISO/IEC 17024, and 10 U.S.C. 2015 sets accreditation options for military credentialing programs.
DoD Manual 8140.03, Cyberspace Workforce Qualification and Management Program, took effect on February 15, 2023. Paragraph 3.2.b.(1)(c) requires personnel certifications to be accredited to ISO/IEC 17024 in accordance with one of the three options in subparagraph 1: the National Commission for Certifying Agencies, ISO/IEC 17011 or the American National Standards Institute. Under paragraph 3.2.b.(1)(c)3 certifications "must maintain relevancy through annual review and re-accreditation within 5 years."
Subparagraphs 3.2.b.(1)(c)5.d and 5.e require at least 70 percent alignment of a certification's content with the core task and core KSA content of the work role, and a formal CWMB vote to accept it as a qualification option. On February 21, 2023, ANSI announced that ANAB had been approved as the accreditation body for the DoDM 8140.03 program.
10 U.S.C. 2015 directs a program that lets members of the armed forces obtain professional credentials that translate into civilian occupations. Under subsection (c)(2) a credentialing program used in it meets one of four requirements; the first is that it "is accredited by a nationally-recognized, third-party personnel certification program accreditor." The statute does not name ISO/IEC 17024.
ANAB also lists federal recognition outside defense: accreditation under ISO/IEC 17024 for the four Home Energy Professional certifications of the U.S. Department of Energy, and approval by OSHA as an accreditor of crane operator certification programs.
Is the IAE Certified Professional exam accredited to ISO/IEC 17024?
No. The IAE Bylaws state that IAE credentials and certificates are not ISO/IEC 17024 accreditation and that IAE uses the standard only as a private benchmarking reference for its internal standards.
The IAE Bylaws list what IAE credentials, certificates and designations do not constitute, and "ISO/IEC 17024 accreditation" is on that list. References to ISO/IEC 17024 "are used only as private benchmarking or alignment references for internal standards-development purposes." The Bylaws forbid IAE to describe any credential as formally accredited unless such recognition has been obtained and publicly documented.
The exam terms, version 1.1 in force since November 3, 2026, publish rules on several points that ISO/IEC 17024 covers. Admission requires a bachelor's degree or higher and at least 3 years of experience in the field, or at least 5 years of experience without a degree. The Secretariat reviews the questionnaire within 1 business day and requests the degree and proof of experience.
The exam lasts up to 2 hours in one sitting: 5 questions of 10 minutes, 2 cases of 25 minutes and a 10-minute question about the candidate's own project. Pasting is disabled, the system keeps a typing log, and each candidate gets individual case data. Before the exam the candidate uploads a photo of an ID document and takes a camera photo; the Secretariat compares them by hand, without automatic face recognition, and deletes the files 30 days after the result.
The result comes within 5 business days. The pass mark is 70 of 100, and the score report shows each section. An appeal is filed within 30 days and reviewed by a Council member who did not score the work; the decision within 10 business days is final. A candidate with a disability may receive up to 50% extra time per task on a written request with a supporting document.
The IAE Certified Professional certificate states the field, is valid for 3 years and is listed in the public registry. Renewal requires a new exam under the current program or 60 hours of professional development over 3 years, and the Secretariat audits 10% of declarations at random. Without renewal the record is marked "expired"; after a violation the certificate is revoked and marked "revoked". IAE membership is not required, and IAE does not promise that the certificate will affect a USCIS decision.
Sources
- ISO/IEC 17024:2026, preview pages (ANSI Webstore)
- ISO/IEC 17024:2012, Conformity assessment, General requirements for bodies operating certification of persons
- IAS, Transition policy for ISO/IEC 17024:2026 (IAS/PCB/033)
- ANAB, ISO/IEC 17020:2026 and ISO/IEC 17024:2026 now available
- ANAB, Credentialing program
- ANAB, National recognition
- ANSI, U.S. Department of Defense approves ANSI ANAB as accreditation body for DoD cyberspace workforce program
- DoD Manual 8140.03, Cyberspace Workforce Qualification and Management Program
- 10 U.S.C. 2015, Program to assist members in obtaining professional credentials
- ANSI Blog, Global trends in the certification of persons
- ANSI Blog, Why ISO/IEC 17024 is critical for the development of a credentialing ecosystem
Read also
All articles
How many times can you retake a certification exam, and how long do you wait between attempts?
Every certification body writes its own retake rule. AWS and The Open Group set no cap on attempts, Microsoft permits five in 12 months, PMI three
Do professional certifications expire, and how does recertification work?
Most professional certifications are issued for a fixed period, often three years, and renewed through continuing education or a new exam. ASQ, NICET
Can a professional certification count as degree equivalency for an H-1B?
Yes, in one narrow way. Under 8 CFR 214.2(h)(4)(iii)(D)(4), certification or registration from a nationally-recognized professional association
Book the exam
The questionnaire takes 15 minutes. Admission decision in 1 business day, exam on any of 14 days.
