Membership

Member, Senior Member, Fellow: what does each grade in a professional society mean?

Professional societies sort their members into grades, and each grade has its own way in. In IEEE a member applies for Senior Member after at least 10 years of professional practice and with three references. Fellow is conferred by the IEEE Board of Directors after a nomination, and each year's total may not exceed one-tenth of one percent of the voting membership. ACM and ASME set their own grades, years of practice and nomination rules.

An older professor at a reception holds a framed blank certificate, colleagues blurred.

What separates a Member, a Senior Member and a Fellow?

The route in. IEEE admits a Member on education or experience in its fields, takes Senior Member applications after 10 years of practice with three references, and confers Fellow by Board decision after a nomination.

The IEEE Houston Section states the entry rule in one sentence: "Membership in IEEE is open to individuals who, by education or experience, give evidence of competence in an IEEE designated field." The same page describes Senior Members as experienced professionals with significant performance and at least 10 years in the field, and Fellows as people recognized for extraordinary accomplishments.

The IEEE Geoscience and Remote Sensing Society calls Senior Member "the highest grade for which IEEE/GRSS members can apply." Above it is Fellow, which has no application: a nominator prepares the file, and the IEEE Board of Directors confers the grade.

ACM has three advanced grades on top of ordinary membership: Senior Member, Distinguished Member and Fellow. ASME has Member and Fellow, and an ASME Fellow candidate must already hold Member grade. Years of practice, the number of references and the person who files the papers are set by each society separately.

What are the requirements for IEEE Senior Member?

At least 10 years of professional practice in an IEEE-designated field, significant performance over at least 5 of those years, and three references from current Fellows, Senior Members or Honorary Members of IEEE.

The GRSS page on Senior Member lists who may apply: an engineer, scientist, educator, technical executive or originator in IEEE-designated fields. The candidate "shall have been in professional practice for at least 10 years" and "shall have shown significant performance over a period of at least 5 of those years." The application needs a resume and the candidate's IEEE member number.

The two time limits test different things. Ten years measures time in practice. Five years of significant performance concerns what the candidate achieved in part of that time, and the resume and the references have to name it.

The three references must come from current IEEE members who hold the grade of Fellow, Senior Member or Honorary Member. According to the IEEE Power and Energy Society, members may apply on their own or be nominated by someone else.

Who reviews a Senior Member application, and what does elevation give?

A panel of Senior Members reviews the applications, and IEEE charges no additional fee to apply. An elevated member may give references to other candidates and hold executive IEEE volunteer positions.

Both society pages use the same sentence: "Senior members are invited to be on the panel to review Senior member applications." The GRSS page adds: "There is no additional fee to apply for Senior Member grade."

The PES page lists what follows elevation. Senior Members are eligible to hold executive IEEE volunteer positions, may be one of the three references for another applicant and are invited to sit on the review panel. On request IEEE sends a letter of commendation to the member's employer, and the elevation may be announced in the section, the society or local media.

The member may also join one new IEEE Society free of charge for one year and receives an engraved Senior Member plaque, which is mailed approximately twelve weeks after elevation.

How does IEEE elect a Fellow?

Through a nomination. The Board of Directors confers the grade on a person with an extraordinary record of accomplishments, and the yearly total may not exceed one-tenth of one percent of the voting membership.

The IEEE Education Society page on Fellow gives the cap in the words of IEEE: the annual total "does not exceed one-tenth of one percent of the total voting Institute membership." That is no more than 1 new Fellow a year for every 1,000 voting members.

A nominee must hold Senior Member or Life Senior Member grade and must have at least five full years of IEEE membership in any grade, consecutive or not, before January 1 of the year of election. Membership in a society affiliate category does not count toward the five years.

The nomination package includes the nomination, the references and the endorsements. The Education Society Fellows Committee does not nominate anyone: its task is "to receive, review, and evaluate the nomination packets." The same page tells nominators to start in early November and asks that the nomination and the references document the impact of the nominee's work.

What does ACM require for Senior Member?

At least 10 years of professional experience in computing, at least 5 years of professional ACM membership in the last 10 years, and endorsements from 3 colleagues. Candidates nominate themselves.

On the ACM Senior Member page a completed degree counts toward the 10 years: 5 years for a doctorate, 4 for a master's degree, 3 for a bachelor's degree and 2 for an associate degree. A candidate with a doctorate therefore needs 5 more years of work.

The nomination has to show "technical leadership, and technical or professional contributions": leadership of projects, research or teaching, publications, patents, or service on professional societies and committees.

The three endorsers need not be ACM members. They should know the work personally, as co-authors, collaborators or supervisors, and each confirms the endorsement through a link sent by email. ACM reviews Senior Member nominations in cycles every three months.

How are ACM Distinguished Members and Fellows chosen?

Both start with a nomination by another ACM professional member. Distinguished Member requires 15 years of experience and 4 or 5 endorsements; Fellow recognizes the top 1% of members and requires 5 endorsements.

A Distinguished Member candidate needs at least 15 years of professional experience in computing, with the same credit for degrees, and at least 5 years of professional ACM membership in the last 10 years. The nomination must give clear evidence of at least two of four items: professional leadership, technical contributions, technical and professional awards, and substantial professional contributions. The candidate is nominated by another ACM professional member, and the nominator cannot also be an endorser.

ACM describes the Fellow grade as recognition of "the top 1% of ACM members" for outstanding accomplishments in computing and information technology or outstanding service to ACM. A candidate needs at least 5 years of professional membership within the last 10 years. In 2024 ACM named 55 members ACM Fellows.

Under the Fellow nomination rules, the nominator must be a professional member of ACM and must secure endorsements from 5 ACM members, preferably Fellows. The Fellows Committee evaluates each nomination. No one may nominate more than 2 candidates or endorse more than 4 candidates in a given year.

What does an ASME Fellow nomination require?

The candidate must hold Member grade, have at least 10 years of active practice and at least 10 years of corporate membership in ASME, and be supported by a nominator and three sponsors.

The ASME nomination steps ask for significant engineering achievements under one or more of five qualification categories, and one category is enough. The initiator must be a current ASME member. Members of the Fellows Review Committee may not initiate or sponsor a proposal during their terms.

A file has four letters: the nominator's letter and three sponsor letters, addressed to the Committee of Past Presidents. ASME advises choosing one sponsor who is not an ASME Fellow or Member, and no more than one letter should come from the nominee's organization.

The Fellows Review Committee considers nominations in March, June, September and December and takes two weeks. Approved nominations then go to the Committee of Past Presidents, which has two more weeks. ASME puts the whole process at about 6 to 8 weeks.

Does a higher grade count for more in an immigration petition?

In EB-1A the USCIS Policy Manual looks at the level the person holds. That level may meet the membership criterion when recognized national or international experts judged the person's achievements in order to grant it.

The EB-1A chapter of the Policy Manual says: "Associations may have multiple levels of membership." Its example is general membership in an international organization for engineering and technology professionals, which may not meet the membership criterion, while the fellow level of the same organization, where nominees need accomplishments and experts judge the nominations, may meet it.

The guide Association membership as an EB-1A and O-1 criterion covers the factors USCIS does not count, the Senior Member question and the documents for each level. Which grade meets the criterion in a particular petition is decided by the USCIS officer on the record.

What grades does IAE have, and how are they granted?

Two by application: Senior Member, on at least 3 years of documented experience and an education document, and Certified International Expert, on at least 4 of 6 points. F.IAE comes only by Council decision.

IAE grades follow the IAE Criteria Matrix, version 1.0, in force since October 26, 2026. Senior Member (SM) requires criterion C1 with at least 1 point, which means at least 3 years of documented experience, and an education diploma (C6). The Council decides on the documents. The application asks for the member IDs of two current IAE members, and first participants may leave the field empty, in which case the documents are verified more closely.

Certified International Expert (CIE) needs at least 4 of 6 points. Experience gives 1 point for 3 to 7 years and 2 points for 8 years or more. Publications (at least 5), a patent or registered method, expert practice (at least 3 works in the last 5 years) and recognition give 1 point each. Two Council members score the application independently, the Council votes, and the decision comes in writing with an assessment against each criterion. A refusal may be appealed within 30 days.

Fellow of the Association (F.IAE) is conferred only on current SM and CIE members, on the Council's initiative, by a special vote without the candidate. The Council looks for at least two of four indicators, such as cited peer-reviewed publications or recognition by courts as a high-level expert. There is no application, and the designation cannot be bought, requested or expedited. On its own initiative the Council confers Professor of the Association, h.c. on members who have held F.IAE for at least 5 years and have mentored at least 10 professionals who obtained IAE credentials.

Until the Superior Credentialing Council is formed, decisions under the matrix are taken by the IAE Board of Directors.

How is an IAE grade verified and written after the name?

The designation follows the name after a comma, in Latin letters. Anyone can check the status in the public registry by QR code or record number, free of charge. The designation is valid only while the record is Active.

The Secretariat confirms receipt of an application within one business day. The Council usually decides within 3 business days of receiving the complete set of documents, and no later than 30 days under the Charter. After a positive decision and payment of the dues, the member receives a registry record numbered IAE-YYYY-XXXXX and a digital certificate in English with a QR code.

On the verification page the record confirms the current status and grade, the attested specialization, the admission date and the registration ID. It does not confirm a recommendation for a particular case, the admissibility of an opinion in court, a license or an academic degree. A record is Active, Suspended or Terminated, and under the membership guide a member stops using IAE designations when membership ends.

The self-check has six questions and names the grade to apply for. The application is filed online with a CV, evidence of achievements and the recommenders' member IDs. IAE designations are not an immigration decision, and the Council decides each application on its documents.

Sources

Read also

All articles

Membership

Ready to apply for membership?

The Secretariat confirms receipt of the application within one business day. The Council usually decides within 3 business days of receiving the complete set of documents, and no later than 30 days under the Charter.

Membership application

Received

Confirmation within one business day

CategorySenior Member
Documents7 files
Council decisionup to 3 business days