Exam program: Sustainability and ESG

IAE-EXAM-ES · version 1.0

Sections, format, sample tasks and scoring rubric of the IAE written exam in the field "Sustainability and ESG".

Version 1.0Effective 25 November 2026Exam in English or Russian

01. Who is the exam for?

For sustainability specialists and managers in companies, environmental specialists and analysts who keep records of emissions, energy, water and waste, prepare data for reports and for customer and investor questionnaires and are responsible for the quality of these data. Admission requires a bachelor's degree or higher and at least 3 years of experience in the field (without a degree, at least 5 years). The exam tests calculations and decisions on company data: emissions of greenhouse gases (gases that trap heat in the atmosphere: carbon dioxide, methane, nitrous oxide and others on the list given in the task) in tonnes of carbon dioxide equivalent (the mass of carbon dioxide that warms the atmosphere as much as a given mass of another gas, using the multipliers given in the task), calculation with emission factors (the mass of emissions per unit of fuel, energy, output or spend, given in the task), energy and water use and waste, emission reduction targets and progress toward them, the costs and benefits of reduction measures in money, losses caused by weather events and by the transition of the economy toward lower emissions, data requests to suppliers, data quality and honest company claims. Knowledge by heart of the names of standards, reporting methods and ratings or the law of a particular country is not required: the factors, formulas, thresholds and rules are given in the task. Work safety and employee health are covered by the "Occupational health and safety" program, statistical process control and process improvement projects by the "Quality management and Lean Six Sigma" program, and the payback of energy-saving measures in buildings and the management of engineering projects by the "Engineering projects: construction and energy" program.

02. Format

  • 5 questions, one per section, 10 minutes each.
  • 2 cases of 25 minutes from two different sections: emissions and resource accounting, reduction targets and projects, climate risks and double materiality, data quality and assurance readiness. The cases require calculations with the candidate's own data: emissions from fuel combustion, refrigerant leaks, purchased electricity and suppliers using the factors given in the task, emissions per unit of output and their change over the years, the annual reduction needed for the target, the cost per tonne reduced and the result of a measure with the discount factors and price per tonne given in the task, the cost per tonne of buying electricity generated by renewable sources, the expected damage from weather events and the costs under different scenarios, the share of data calculated from assumptions, the error in a sample of documents and its extension to all data, differences between the data and energy invoices.
  • 1 question about the project from the candidate's questionnaire, 10 minutes.
  • Up to 2 hours in total, in one sitting. Pasting is disabled, and each candidate gets their own case data.

03. Sections and weights

  • Emissions and resource accounting - 20 %: reporting boundaries: which plants, buildings and vehicles are included in the report under the rule given in the task, direct emissions (emissions from sources the company owns or controls: fuel burned in boilers, furnaces and its own vehicles, refrigerant leaks) by fuel use and the factors given in the task, converting methane and refrigerants into the equivalent with the multipliers given in the task, indirect emissions from purchased energy (emissions from generating the electricity, heat and steam the company buys and uses) and two ways of calculating them: the grid average method (purchased electricity multiplied by the average emissions of the regional power system per 1 MWh given in the task) and the contract-based method (purchased electricity multiplied by the emissions per 1 MWh under the contract with the supplier or under a certificate; for electricity without a contract or certificate the residual value given in the task is used), value chain emissions (emissions at the company's suppliers and customers: making purchased goods, transporting freight, business travel, use and disposal of sold products) by spend, by mass and distance or from supplier data, the choice of value chain categories with the largest emissions, energy use in MWh, water withdrawal and discharge, waste by type and the share of waste sent for recycling, emission intensity (emissions divided by output or another indicator given in the task), the base year (the year whose emissions are compared with the emissions of later years in targets and reports), base year recalculation (changing the emissions of the comparison year after buying or selling a business, changing the calculation method or finding an error, if the change exceeds the threshold given in the task) and comparing years without double counting.
  • Reduction targets and projects - 20 %: a reduction target against the base year in percent and in tonnes, the reduction path (the emissions the company must have in each year to reach the target on time; with an equal annual reduction the same amount is subtracted each year) and the lag behind it, output growth and meeting the target, the marginal abatement cost (the annual cost of a measure minus the annual savings, divided by the tonnes reduced per year) and the choice of a set of measures that meets the target at the lowest cost, the net present value (the sum of the cash flows of a project by year multiplied by the discount factors given in the task, minus the investment) and the simple payback of a measure, the internal carbon price (a price per tonne of emissions that the company by its own decision adds to the costs of projects when comparing them; the company pays it to no one) and how the decision changes at a different price, ways of buying electricity generated by renewable sources: an own solar plant, a long-term power purchase agreement (a contract to buy the electricity of a specific power plant at the price and for the term given in the task, usually together with its certificates), the energy attribute certificate (a document stating that 1 MWh of electricity was generated by a renewable source; the certificate holder counts this electricity at the emissions stated in it), their cost per tonne and the change in emissions under each calculation method, carbon credits (documents for the reduction or removal of 1 tonne of emissions in a project of another organization that the company buys; under the rule given in the task they do not reduce its own reported emissions) and their place in the plan, a reduction plan with owners and deadlines.
  • Climate risks and double materiality - 20 %: double materiality (a topic is material if it noticeably changes the company's money: revenue, costs, the value of assets, or if through it the company noticeably affects people and the environment; both sides are scored on the scales and thresholds given in the task) and the choice of topics for the report by score, physical risk (losses caused by weather and climate events: floods, heat, drought, storms, with the frequency and damage given in the task) in money: the expected damage per year as the frequency of an event multiplied by the damage, downtime and lost revenue, protective measures and their payback, transition risk (losses caused by the shift of the economy toward lower emissions: payments for emissions, new requirements of customers and authorities, changes in demand and technology, under the assumptions given in the task) in money: payments for emissions at the price in the scenario, the share of revenue from products with high emissions, the climate scenario (a set of assumptions for the years ahead on the price of emissions, weather, demand and requirements, given in the task) and the comparison of two scenarios, opportunities: demand for products with lower emissions and resource savings, data requests to suppliers: which suppliers to ask first by their share of the value chain emissions, what to request and how to check the answer, the share of value chain emissions based on supplier data, answers to customer and investor questionnaires based on company data.
  • Data quality and assurance readiness - 20 %: primary data (meter readings, energy and fuel invoices, delivery notes and data a supplier provided from its own records) and data based on assumptions, the estimation share (the share of emissions calculated from assumptions without invoices, meter readings or supplier data) and reducing it, filling gaps for missing months under the rule given in the task, reconciling energy use with supplier invoices and meter readings, a sample of documents for checking and extending the error found in the sample to all data under the rule given in the task, unit errors, double counting and missed sites, correcting prior data by the threshold given in the task and explaining the correction, data controls: who enters, who reviews, reconciliation of totals and checks of sharp changes, the evidence trail (the path that leads a figure in the report through the calculation to the invoice or meter reading by which the figure can be checked), external assurance (a check of the data by an independent organization with a conclusion on whether they can be relied on; the scope of the check is given in the task): what to prepare, which findings to close before the check, deadlines.
  • Professional practice - 20 %: honest claims about products and the company: what may be claimed on the basis of the data and how, greenwashing (a claim of an environmental benefit that is not supported by data or presents a product or the company as better than it is) and how to avoid it, claims involving carbon credits under the rule given in the task, pressure by management or the sales department to improve figures before a report or a reply to a customer questionnaire, the confidentiality of supplier data: what may be passed to a customer and into the report under the contract with the supplier and the company policy given in the task, reporting a problem in the data to the manager and under the procedure in the company policy, explaining the limits of the data to management: the share of estimates, uncertainty, what can and cannot be stated, the report to management: what happened in figures, the causes, the options, the recommendation, the candidate's own project.

04. Sample tasks

Question. Over the year a plant burned 2,400,000 cubic meters of natural gas, its forklifts and trucks used 100,000 liters of diesel fuel, and 85 kg of refrigerant leaked out of its refrigeration units. Emission factors given in the task: 1.9 tonnes per 1,000 cubic meters of gas, 2.7 tonnes per 1,000 liters of diesel fuel, and 1 kg of refrigerant equals 2 tonnes of carbon dioxide equivalent. The plant bought 10,000 MWh of electricity, 4,000 MWh of it under a contract with a wind farm with emissions of 0; the average emissions of the power system are 0.4 tonnes per MWh, and the residual value for electricity without a contract is 0.5 tonnes per MWh. The plant produced 50,000 tonnes of output. The company's base year was calculated with the grid average method: emissions of 10,000 tonnes with output of 40,000 tonnes. The draft report says: "emissions fell by 20 % against the base year". Calculate direct emissions, indirect emissions from purchased energy with both methods and the total under each method. Calculate the emission intensity of this year and of the base year and its change. Check the sentence in the draft and write how to correct it.

Case. Under its policy the company's target is to cut direct emissions and indirect emissions from purchased energy by 30 % by 2030 against the 2024 level of 20,000 tonnes; under the plan the reduction is the same in each year. Emissions from electricity in the target are counted with the grid average method, and the contract-based method is shown separately in the report. In 2026 emissions are 19,000 tonnes, of which 8,000 tonnes come with 20,000 MWh of purchased electricity (average emissions of the power system 0.4 tonnes per MWh, residual value 0.5 tonnes per MWh; the company has no contracts or certificates). The annual cost of a measure under the company rule: the investment divided by a service life of 10 years, plus annual expenses, minus annual savings. Measure A: heat recovery on furnaces, investment 300,000, gas savings 60,000 a year, reduction 1,500 tonnes a year. Measure B: replacing diesel forklifts with electric ones, investment 400,000, savings 25,000 a year, reduction 500 tonnes a year. Measure C: a rooftop solar plant, investment 1,200,000, output 2,500 MWh a year, which replaces purchases at 60 per MWh, reduction 1,000 tonnes a year. Measure D: replacing the refrigerant in refrigeration units, investment 120,000, reduction 600 tonnes a year. Measure E: methane capture at the wastewater treatment plant, investment 500,000, maintenance expenses 40,000 a year, reduction 2,000 tonnes a year. The company's internal carbon price is 40 per tonne. The chief financial officer proposes skipping the measures, buying energy attribute certificates for all electricity, 20,000 MWh at 2 per MWh a year, and treating the target as met. The head of sales wants to write in the reply to a large customer's questionnaire: "the company's products are made without emissions". Calculate the target emissions in 2030, the reduction path, the lag behind it in 2026 and the reduction needed by 2030. Calculate the marginal abatement cost of each measure, choose the set of measures that meets the target at the lowest cost and say what the internal carbon price changes. Calculate the emissions from electricity with the certificates under both methods and the cost per tonne, and answer the chief financial officer. Write a message to the chief executive officer: which measures to take, what may be written in the reply to the customer and which risks remain.

The figures and circumstances of the cases are different for each candidate.

05. Scoring rubric

Each task is scored on four criteria, and the total is converted to 100 points taking the section weights into account.

  • Correctness of the solution - 40 %.
  • Reasoning behind decisions - 25 %.
  • Risks and constraints - 20 %.
  • Clarity of the answer - 15 %: structure and precise wording. Grammar and style do not reduce the score if the meaning is clear.

06. Result

  • Pass mark - 70 of 100.
  • Result in 5 business days. Those who pass receive an IAE Certified Professional certificate in the field "Sustainability and ESG", valid for 3 years; scores by section are in a separate report.
  • The certificate confirms that the candidate passed the written exam under this program. It is not a license or an accreditation and does not replace the sustainability certificates of other organizations. Employers and authorities make hiring and other decisions about the candidate under their own rules.
  • Retake 30 days after the first failed attempt and 60 days after the second, with no more than 3 attempts in 12 months.
  • Full terms: the Exam terms page.
  • The Credentialing Council reviews the program at least once a year.

07. What is not covered?

  • The IAE exam is not an exam of other organizations that certify sustainability professionals, is not affiliated with them and does not replace their exams. The topics and tasks of the IAE exam do not repeat the syllabi of those exams. The names of certifications and organizations belong to their owners.
  • Knowledge by heart of the names and requirements of reporting standards and methods, ratings, lists and laws is not required. Emission factors, gas multipliers, reporting boundaries, recalculation thresholds, scoring scales and formulas are given in the task; the candidate may rely on any method if the decision is justified by the data of the task.
  • The exam does not test legal advice, the interpretation of laws on reporting and on consumer claims, permits for emissions and discharges or the rules of emissions trading and payments for emissions in particular countries. The exam gives no legal opinion and no opinion on the reliability of data and does not replace external assurance: disclosure rules, requirements for claims and the procedure for checking data are given in the task as the company's policy or the customer's requirements, and payments for emissions are given as a price per tonne. The certificate does not change any reporting obligations of the candidate or the company.
  • Work safety, employee injuries and health, noise and workplace air are covered by the "Occupational health and safety" program. In this exam air and water are considered as the company's emissions and discharges into the environment, and indicators about employees are not part of the tasks.
  • Statistical process control, control charts and process improvement projects are covered by the "Quality management and Lean Six Sigma" program. In this exam a sample of documents and data controls relate to data on emissions and resources, and the sampling rules are given in the task.
  • The payback of energy-saving measures in buildings, the plan for measuring energy savings, and the design and selection of engineering equipment are covered by the "Engineering projects: construction and energy" program. In this exam measures are compared by the cost per tonne reduced and by their contribution to the target, and generation, energy savings and investment are given in the task.
  • The choice of suppliers by total cost, negotiations and purchasing contracts are covered by the "Procurement and supply chain" program. In this exam suppliers are chosen only for requests of emissions data, by their share of the value chain emissions.
  • Bookkeeping, financial statements and their audit are covered by the "Accounting and audit" program. In this exam reconciliation with invoices and a sample of documents relate to data on emissions, energy, water and waste, and materiality is assessed for report topics on the scales given in the task.
  • Compliance programs, anti-money laundering, sanctions screening and the review of intermediaries are covered by the "Compliance and anti-money laundering (AML)" program. In this exam suppliers are reviewed only for their emissions data, and a problem in the data is reported under the procedure in the company policy.
  • Budgets, forecasts and the evaluation of the company's investment decisions are covered by the "Financial analysis and FP&A" program. In this exam the net present value and the payback period are calculated only for emission reduction measures and measures against physical risk, and the discount factors are given in the task.
  • Product life cycle assessment with databases and work in particular emissions accounting software and on questionnaire and rating platforms are not tested. The data needed for the solution are given in the task, and calculations are done by hand or on a calculator.

08. Preparation

  • The practice exam runs in the same interface: 2 questions from different sections, a 15-minute case and a project question.
  • Review the calculations: emissions from fuel, refrigerants and purchased electricity with emission factors, both methods for emissions from purchased electricity, value chain emissions by spend, by mass and distance and from supplier data, emission intensity, the change against the base year and base year recalculation by the threshold, the reduction path and the lag behind it, the marginal abatement cost and a set of measures that meets the target, the net present value and payback of a measure with the internal carbon price, the cost per tonne of buying electricity generated by renewable sources, the expected damage from physical risk and payments for emissions under climate scenarios, double materiality scores, the estimation share, extending a sample error to all data, differences against energy invoices.
  • Formulas are given in the task when needed, as are emission factors, rates, thresholds and the rules of the company's policy. A calculator is enough for the calculations, and reference materials may be used. The names of standards and reporting methods are not needed for the solution: the accounting rules are given in the task.
  • Answer by the points of the task: the rule or factor from the task, the calculation on your own figures, the decision, risks and what needs to be checked or clarified with the owner of the data. For each conclusion about emissions and progress toward a target, name the data and the calculation method it rests on. Pasting is disabled, so the answer is typed.
  • Prepare the project description for the questionnaire: your role, the type of organization and its scale (the number of sites or the volume of output), the task, indicators before and after (for example, emissions in tonnes, emissions per unit of output, energy use or the estimation share), the decisions taken, the result in figures. Do not include confidential data of the employer and its suppliers (costs, contract prices, data of individual suppliers): the result can be given as a percentage of the starting level. The project question is based on this description.
  • Text from AI services and help from other people are not allowed.

Exam

Book the exam

The questionnaire takes 15 minutes. Admission decision in 1 business day.

Candidate questionnaire

Received

Admission decision within one business day

FieldSustainability and ESG
DurationUp to 2 hours
Result5 business days