Examinations
Buyer's right to inspect goods under UCC 2-513: when does inspection end and acceptance begin?
Section 2-513 of the Uniform Commercial Code lets a buyer inspect goods before paying for them or accepting them, at a reasonable place and time and in a reasonable manner. C.O.D. terms and payment against documents of title cut into that right, and a contract can fix the place or method. Once the buyer has had a reasonable opportunity to inspect, keeping the goods without an effective rejection is acceptance.

What does UCC 2-513 let the buyer do before paying or accepting?
Inspect the goods at any reasonable place and time and in any reasonable manner, unless the parties agreed otherwise. When the seller is to ship the goods, the inspection may take place after they arrive.
New York's text of the Uniform Commercial Code states the rule in section 2-513(1), titled "Buyer's Right to Inspection of Goods": unless otherwise agreed, "the buyer has a right before payment or acceptance to inspect them at any reasonable place and time" and in any reasonable manner. When the seller is to send the goods, the inspection may take place after they arrive. The cases discussed in this article applied the same Article 2 rules as enacted in New Jersey and Michigan.
The section gives the buyer control, within reason, over three things: the place, the time and the manner of inspection. It names no test methods, sample sizes or deadlines. Those come from the contract or, once a dispute reaches court, from what the judge finds reasonable for the goods in question.
The right is tied to two moments. It exists before payment and before acceptance. Payment terms that cut it back are in section 2-513(3) and section 2-512. The point at which inspection turns into acceptance is set by section 2-606.
When must the buyer pay before inspecting the goods?
When the contract provides for delivery C.O.D. or on similar terms, or for payment against documents of title, unless payment falls due only after the goods become available for inspection. Such payment is not acceptance.
Under section 2-513(3), unless otherwise agreed, "the buyer is not entitled to inspect the goods before payment of the price" when the contract provides for delivery C.O.D. or on similar terms, or for payment against documents of title. The exception is a contract under which payment is due only after the goods are to become available for inspection. The same subsection refers to the C.I.F. rules in section 2-321(3).
Section 2-512 covers a contract that requires payment before inspection. Non-conformity of the goods does not excuse payment, with two exceptions. The first applies where "the non-conformity appears without inspection." The second applies where the required documents were tendered but the circumstances would justify an injunction against honor under section 5-114.
Section 2-512(2) protects the buyer who paid first. The payment does not constitute an acceptance of the goods and does not impair the buyer's right to inspect or any of the buyer's remedies. A buyer who paid against a bill of lading can still inspect after arrival and reject goods that do not conform.
Section 2-605(2) sets one limit on that protection. A payment against documents made without reservation of rights precludes recovery of the payment for defects apparent on the face of the documents. A buyer who sees a discrepancy in the papers themselves keeps the claim to the money only by reserving rights when paying.
Who pays for the inspection?
The buyer pays first. Under UCC 2-513(2) the buyer can recover the expenses from the seller if the goods do not conform and are rejected, and section 2-715(1) lists inspection costs among incidental damages.
Section 2-513(2) reads: "Expenses of inspection must be borne by the buyer but may be recovered from the seller" if the goods do not conform and are rejected. Recovery depends on two facts the buyer proves later: the goods did not conform, and the buyer rejected them.
Section 2-715(1) defines the buyer's incidental damages. The list starts with "expenses reasonably incurred in inspection, receipt, transportation and care and custody of goods rightfully rejected." It goes on to "any commercially reasonable charges, expenses or commissions in connection with effecting cover" and ends with "any other reasonable expense incident to the delay or other breach."
The statute draws no line between an inspection by the buyer's own staff and one by an outside engineer or laboratory. Both are expenses of inspection. Where a rejection turns out to be wrongful, section 2-602(3) sends the seller to its remedies under section 2-703, and the inspection costs stay with the buyer under section 2-513(2).
Can the contract fix where and how the goods are inspected?
Yes. Under UCC 2-513(4) a place or method of inspection fixed by the parties is presumed exclusive. If it becomes impossible, the general rule applies unless the parties made it an indispensable condition.
Section 2-513(4) presumes that a place or method of inspection fixed by the parties is exclusive. Unless the parties expressly agree otherwise, such a clause does not postpone identification of the goods and does not shift the place for delivery or the passing of the risk of loss. If compliance with the agreed place or method becomes impossible, inspection follows section 2-513, unless the parties clearly intended that place or method as an indispensable condition whose failure avoids the contract.
Section 2-515(b) adds a related option. The parties may agree to an inspection or survey by a third party to determine the conformity or condition of the goods. They may also agree that the third party's findings will be "binding upon them" in any later litigation or adjustment.
A supply contract can therefore name a laboratory, a sampling plan, an acceptance test or a pre-shipment inspector. When it does, the first factual questions in a dispute are whether the agreed method was used, who took the samples and whether the parties made the findings binding.
When does inspection turn into acceptance under UCC 2-606?
Acceptance occurs when the buyer, after a reasonable opportunity to inspect, signifies that the goods conform or will be kept anyway, fails to make an effective rejection, or acts inconsistently with the seller's ownership.
Section 2-606(1) lists three routes to acceptance. Under paragraph (a) the buyer, after a reasonable opportunity to inspect, signifies that the goods are conforming or that the buyer will keep them in spite of their non-conformity. Under paragraph (b) the buyer fails to make an effective rejection under section 2-602(1), but acceptance does not occur until the buyer has had a reasonable opportunity to inspect. Under paragraph (c) the buyer does an act inconsistent with the seller's ownership; if the act is wrongful as against the seller, it counts as acceptance only if the seller ratifies it. Section 2-606(2) adds that acceptance of a part of any commercial unit is acceptance of that entire unit.
Taking delivery is not acceptance. In Capitol Dodge Sales, Inc. v. Northern Concrete Pipe, Inc., 131 Mich. App. 149, 346 N.W.2d 535, decided on December 19, 1983, the Michigan Court of Appeals held that acceptance requires an act of the buyer beyond taking delivery or possession, and that transfer of possession or title may bear on acceptance without deciding it. The Secretary of State had issued title to the truck in the buyer's name on December 1, 1978, and the court still found no acceptance.
Acceptance ends the right to reject. In Zabriskie Chevrolet, Inc. v. Smith, 99 N.J. Super. 441, 240 A.2d 195, the court wrote that possession "does not mean acceptance and the corresponding loss of the right of rejection," and it found that Smith had not accepted the car. In Capitol Dodge the trial court had found a wrongful attempt to revoke acceptance; the Court of Appeals found no acceptance and decided the case as a rejection.
How much inspection counts as a reasonable opportunity?
Enough to find out whether the goods work for their intended use when a look is not enough. Courts in New Jersey and Michigan treated a short drive and a few days of trial use as part of the inspection.
Zabriskie was decided by the Superior Court of New Jersey, Law Division, on February 29, 1968. Smith had signed a purchase order for a new 1966 Chevrolet Biscayne and tendered a check for $2,069.50. The car was delivered to his wife on the evening of Friday, February 10, 1967. About 0.7 mile after leaving the showroom it stalled at a traffic light, then stalled at each later stop, and halfway home it would not move in drive. Smith stopped payment on the check and told the dealer the sale was cancelled.
The court wrote that if the dealer "equates a spin around the block with 'reasonable opportunity to inspect'," the contention "is illusory and unrealistic." Finding the defect within 0.7 mile and minutes after leaving the showroom was "well within the ambit" of a reasonable opportunity to inspect. The dealer had replaced the transmission with one taken from a showroom car. The court held that substitution was no cure: "A 'cure' which endeavors by substitution to tender a chattel not within the agreement or contemplation of the parties is invalid." Judgment went to the buyer, and on his counterclaim the court awarded him the $124 deposit.
Capitol Dodge concerned a new 1979 Dodge pickup bought for use with a snowplow. The buyer's employees picked up the truck, and over about three days it overheated repeatedly, including on a short drive to a nearby town. The seller's service department advised rechecking the blade position and refilling the radiator and said a thermostat might be the problem. On the third day the buyer told the seller by phone that it was not taking the truck and was stopping payment on the check.
The Michigan court wrote that "something more than a mere visual inspection is appropriate before the buyer can be held to have accepted the machine" and that "A 'reasonable time to inspect' under the UCC must allow an opportunity to put the product to its intended use" or to test it. It reversed the trial court and remanded for entry of judgment for the buyer. Neither Zabriskie nor Capitol Dodge set a number of miles or days.
What must the buyer tell the seller after finding a defect?
That the goods are rejected, within a reasonable time after delivery and with seasonable notice under UCC 2-602(1). Under section 2-605, defects ascertainable by reasonable inspection but left unstated may be lost.
Section 2-602(1) requires rejection "within a reasonable time" after delivery or tender and makes it ineffective "unless the buyer seasonably notifies the seller." In Zabriskie the buyer stopped payment and called the dealer on the day of delivery. In Capitol Dodge the buyer phoned on the third day, and the court held that it had an absolute right to reject for non-conformity within a reasonable time and had used that right.
Section 2-605(1) adds a rule about the content of the rejection. A buyer who fails to state, in connection with rejection, a particular defect ascertainable by reasonable inspection cannot rely on that defect to justify rejection or to establish breach in two situations. The first is where the seller could have cured the defect if it had been stated seasonably. The second applies between merchants, where the seller after rejection has made a written request for "a full and final written statement of all defects" on which the buyer proposes to rely.
The words "ascertainable by reasonable inspection" turn part of the legal question into a technical one: could the defect be found with the inspection available to the buyer, and by which test? An expert answers it by describing the defect, the test that reveals it and the equipment the test needs. A rejection letter written after such an inspection can list each defect with the measurement or test result behind it.
What must the buyer do with goods after rejecting them?
If the buyer has taken possession, hold the goods with reasonable care at the seller's disposition long enough for the seller to remove them. Using them as the buyer's own after rejection is wrongful against the seller.
Section 2-602(2) sets three rules, subject to sections 2-603 and 2-604 on rejected goods. After rejection, any exercise of ownership by the buyer over any commercial unit is wrongful as against the seller. A buyer who took physical possession before rejecting and holds no security interest under section 2-711(3) must hold the goods with reasonable care at the seller's disposition for a time sufficient to permit the seller to remove them. Beyond that, the buyer has no further obligations about goods rightfully rejected.
The costs of that care are part of incidental damages under section 2-715(1), which names "care and custody of goods rightfully rejected." In Zabriskie the dealer towed the car to its shop the day after delivery and kept it in storage, and the judgment required Smith to sign the documents returning title to the dealer on demand.
Use after rejection also changes the object of any later examination. Under section 2-606(1)(c) an act inconsistent with the seller's ownership that is wrongful as against the seller counts as acceptance only if the seller ratifies it, so the legal effect of such use depends on what the seller does next. The physical effect does not: mileage, wear and repairs added after rejection are on the goods when the expert examines them.
How is the condition of disputed goods preserved for court?
Under UCC 2-515 either party, on reasonable notification, may inspect, test and sample goods in the other's possession or control. After suit is filed, Federal Rule of Civil Procedure 34 covers testing tangible things.
Section 2-515(a) gives that right "in furtherance of the adjustment of any claim or dispute" and states its purpose as ascertaining the facts and preserving evidence. The right runs both ways. A seller who wants to examine goods the buyer rejected and a buyer who wants to test the seller's retained samples rely on the same subsection.
In federal court, Rule 34(a)(1)(B) lets a party request, within the scope of Rule 26(b), that the other party produce "any designated tangible things" so that the requesting party can "inspect, copy, test, or sample" them. Under Rule 34(b)(2)(A) the written response is due within 30 days after service, unless the parties agree on another period under Rule 29 or the court orders one.
A later examination under Rule 34 can be checked against an inspection made before suit if that first inspection recorded the condition of the goods on arrival, with dates, photographs, serial numbers and test readings.
What does IAE do when the inspection or rejection of goods is disputed?
An IAE expert reports on whether the goods were defective when delivered, whether a failure came from manufacturing or misuse and what the goods were worth as accepted, in up to 5 business days.
For warranty and supply disputes in US courts, IAE prepares an expert report on the client's questions or a review of the opposing expert's report. The expert reads fracture surfaces, wear and repair marks to tell a manufacturing flaw from misuse, tests the item against the merchantability rule of UCC 2-314 and the contract description, and documents its condition before any test likely to change it. Such testing follows ASTM E860-22.
The client describes the task through the Request a quote button on the service page and names the goods, the defect, the inspection and rejection dates and what is attached: the contract or purchase order, the delivery papers, the rejection notice, photographs and any report by the seller or by the other side's expert. The secretariat confirms receipt the same day. Within one business day IAE confirms the format, the cost, the deadline and the specialist from its registry, and the client approves the candidate and the CV before work starts. The signed PDF is issued in up to 5 business days, with a 48-hour rush for tight deadlines.
Every specialist is a member of the public IAE registry, can be verified by Member ID or QR code and confirms in the document that he or she has no interest in the outcome. Materials are not passed to third parties without the client's consent. A report is evidence that the court weighs with the rest of the record. Neither IAE nor the expert guarantees the outcome, and IAE is not a law firm and does not advise on case strategy.
Sources
- N.Y. U.C.C. Law § 2-513, Buyer's Right to Inspection of Goods (New York State Senate)
- U.C.C. § 2-512, Payment by Buyer Before Inspection (Cornell LII)
- U.C.C. § 2-515, Preserving Evidence of Goods in Dispute (Cornell LII)
- U.C.C. § 2-602, Manner and Effect of Rightful Rejection (Cornell LII)
- U.C.C. § 2-605, Waiver of Buyer's Objections by Failure to Particularize (Cornell LII)
- U.C.C. § 2-606, What Constitutes Acceptance of Goods (Cornell LII)
- U.C.C. § 2-715, Buyer's Incidental and Consequential Damages (Cornell LII)
- Zabriskie Chevrolet, Inc. v. Smith, 99 N.J. Super. 441, 240 A.2d 195 (Law Div. 1968)
- Capitol Dodge Sales, Inc. v. Northern Concrete Pipe, Inc., 131 Mich. App. 149, 346 N.W.2d 535 (1983)
- Federal Rules of Civil Procedure, Rule 34 (Cornell LII)
Read also
All articles
Goods damaged in a warehouse: who is liable, and what does the goods expert establish?
Goods go into a warehouse sound and come out wet, crushed, spoiled or short. Under UCC 7-204 the warehouse answers for damage caused by its failure
How do you prove goods are counterfeit, and what does the product expert compare?
Under the Lanham Act a counterfeit is a spurious mark that is identical with, or substantially indistinguishable from, a registered mark. Whether
Goods damaged in shipping: who bears the loss, and what does the expert establish?
When goods arrive damaged, three questions decide who pays: when the risk of loss passed to the buyer under UCC 2-509, whether the goods were alreadyExpert examinations
Ready to discuss your case?
Send the materials: the secretariat will confirm the format, cost, deadline and the specialist within one business day.

