
Part failure
Metallurgists and materials engineers: cracks, welds, heat treatment, alloy composition. Electrical engineers on wiring and electronics failures. Comparison with drawings and sound units.
Manufacturing
Failures
Expert witnesses · Product liability
Defects in vehicles, medical devices, consumer products and industrial equipment. Within 5 business days you receive 2-3 candidates with CVs, hourly rates and lists of prior testimony: failure analysis, materials science, electrical engineering, product design, vehicle crashworthiness, human factors, warnings and instructions. The search costs $2,000 per case.

for 2-3 candidates with CVs and lists of prior testimony
We choose the specialty by the defect theory you need to prove.

Metallurgists and materials engineers: cracks, welds, heat treatment, alloy composition. Electrical engineers on wiring and electronics failures. Comparison with drawings and sound units.

Engineers from the product's industry: which other designs were available when the product left the manufacturer. Vehicle crashworthiness, safety-related defects under 49 U.S.C. 30118.

Human factors and warnings specialists: what a user would notice on the label and in the manual. Medical device use errors under the 2026 FDA human factors guidance.
702rule of evidence
Since December 1, 2023, the proponent shows the court it is more likely than not that the data are sufficient and the method is reliable and reliably applied.
26(a)(2)(B)expert report
Opinions and their basis, facts or data, exhibits, qualifications with publications from the previous 10 years, testimony from the previous 4 years, compensation.
34(a)(1)(B)product inspection
A party may ask another party to produce a product to inspect, test or sample it. The request names a reasonable time, place and manner, and the written response is due within 30 days.
82.005Texas statute
The claimant proves a design that would have prevented or significantly reduced the risk without substantially impairing utility and was economically and technologically feasible when the product left the manufacturer or seller.
State courts apply their own rules on expert admissibility and on proof of defect: name the state and court in your request.
IAE experts who testify in US courts. The Secretariat sends their rates, testimony lists for the last 4 years and publications together with the candidacy.

Combustion engineering, Industrial flare design and performance, CFD modeling of reacting flows, Air emissions monitoring and control, Fire cause and origin investigation
How it works
Within 1 business day we confirm whether we can search; candidates arrive within 5 business days.
Step 1 · 1 day
Tell us the field, the case type, the court, your side and the expert disclosure deadline. List the parties and their counsel.
Step 2
Each candidate confirms in writing that he or she has no ties to the parties or their counsel.
Step 3 · 5 business days
2-3 candidates with CVs, hourly rates, testimony in the last 4 years and publications in the last 10 years: the lists that Rule 26(a)(2)(B) requires.
Step 4
You choose the expert. The expert bills your firm directly or through IAE under the agency option.
$2,000per case
Paid in advance2-3 candidates with CVs and testimony lists within 5 business days.
+$100per hour
OptionalOne invoice from IAE: retainer, monthly invoices, ACH or wire transfer within 15 days. The search fee is credited to the first invoice.
$0second search
If none fitsIf no candidate fits, we search again for free. If we find no candidates, we refund the fee.
0tied to the outcome
Fee ruleThe expert's hourly rate never depends on the outcome of the case or on the content of testimony.
Standard terms in advance:
Testing an engineer's method, a destroyed product, carelessness in manufacturing defect claims.
Yes. In Kumho Tire Co. v. Carmichael (U.S. Supreme Court, 1999), the Court held that the judge's gatekeeping duty applies to all expert testimony, including testimony based on technical and other specialized knowledge. The district court excluded a tire failure analyst who inferred a defect from his inspection and the absence of at least two of four signs of abuse. The Supreme Court found no abuse of discretion.
In Ohio, yes. Under Ohio Revised Code 2307.73(B), if the claimant cannot prove the defect by direct evidence because the product was destroyed, it is sufficient to present circumstantial or other competent evidence that establishes, by a preponderance of the evidence, one of the four kinds of defect. The expert then works from photographs, records and exemplar units of the same model.
Not in Ohio. Under Ohio Revised Code 2307.74, a product is defective in manufacture if, when it left the manufacturer's control, it deviated in a material way from the manufacturer's design specifications, formula or performance standards, or from otherwise identical units, even though the manufacturer exercised all possible care. The expert compares the failed unit with the drawings and with sound units.
No. IAE finds and vets experts. Case strategy and the decision to retain an expert stay with the attorney.
The second search is free. If we find no candidates, we refund the fee.
Each candidate confirms in writing that he or she has no ties to the parties or their counsel. That is why the request asks for a list of the parties and counsel.
Request

Hello, I am Sergei Tkach, Executive Director of IAE. Describe the case, the court and the expert disclosure deadline: within one business day we will tell you whether we can find an expert by your deadline. Candidate names and CVs come after the search fee is paid.
Expert witnesses for the other five case types.

Physicians, biomechanical engineers and rehabilitation specialists: cause of injury, treatment, loss of earning capacity.

Physicians and nurses. In medical malpractice cases the expert often has to practice the same specialty as the defendant.

Economists, forensic accountants and industry specialists: damages, lost profits, business valuation.

Civil engineers and cost estimators: construction defects, building codes, delays and costs.

Engineers, software developers and economists: patents, source code, trade secrets, damages.


