Expert witnesses
Product liability expert witness: which engineer does a defect case need?
A product liability claimant must prove that the product was defective and that the defect caused the harm. Ohio Revised Code 2307.73 names four kinds of defect, and sections 2307.74 to 2307.77 describe each of them. In Kumho Tire Co. v. Carmichael (1999) the Supreme Court held that the judge's reliability screening covers engineers. Since December 1, 2023, Rule 702 also requires the judge to find each reliability condition met more likely than not.

What does a product liability expert witness do?
The expert examines the product and its records, determines what failed and why, and gives the jury an opinion on whether a defect existed and whether it caused the harm, with the basis for each conclusion.
Under Federal Rule of Evidence 702, a witness qualified by "knowledge, skill, experience, training, or education" may give an opinion in federal court when four conditions are met. The expert's specialized knowledge must help the jury understand the evidence or decide a fact in issue. The testimony must rest on sufficient facts or data and come from reliable principles and methods, and the expert must apply those methods reliably to the facts of the case.
In a product case the engineer works with the product or what is left of it, the manufacturer's drawings and specifications, the incident reports and the user's account of what happened.
The opinion answers two of the three points the claimant must prove under Ohio Revised Code 2307.73(A): that the product was defective and that the defect "was a proximate cause of harm for which the claimant seeks to recover compensatory damages." The third point is that the defendant made "the actual product that was the cause of harm," a question of identification: which company made the unit that failed.
Which engineer does a defect case need?
One whose field matches the defect theory: a materials or failure analysis engineer for a broken part, an engineer from the product's industry for a design claim, a human factors specialist for warnings.
Section 2307.73(A)(1) lists four theories. The product was "defective in manufacture or construction," "defective in design or formulation," "defective due to inadequate warning or instruction," or it "did not conform to a representation made by its manufacturer."
A manufacturing defect is a deviation. Under section 2307.74, a product is defective in manufacture if, when it left the manufacturer's control, "it deviated in a material way from the design specifications, formula, or performance standards of the manufacturer, or from otherwise identical units manufactured to the same design specifications, formula, or performance standards." The engineer for this theory compares the failed unit with the drawings and with sound units of the same design. Cracks, welds, heat treatment and alloy composition are the work of metallurgists and materials engineers. Electrical failures are examined by electrical engineers. The same section says a product may be defective "even though its manufacturer exercised all possible care in its manufacture or construction." A manufacturing claim under section 2307.74 therefore needs no proof of carelessness in the factory.
Under section 2307.75(F), a product is not defective in design if, when it left the manufacturer's control, "a practical and technically feasible alternative design or formulation was not available that would have prevented the harm" without substantially impairing the product's usefulness or intended purpose. The engineer for a design claim, who has worked on products of the same type, testifies about which other designs existed at that time and whether one of them would have prevented the harm.
A warnings claim concerns the text on the label and in the manual and what the user did after reading it, or without reading it. Human factors specialists and warnings specialists testify about what a user would notice on the product and how users act on a warning.
The fourth theory turns on what the manufacturer said about the product, and an engineer joins that part of the case when the parties dispute whether the product performed as stated.
What did the Supreme Court decide in Kumho Tire v. Carmichael?
On March 23, 1999, the Supreme Court held that the judge's duty to screen expert testimony for reliability covers engineers and other technical experts, and reversed the Eleventh Circuit, which had set aside the exclusion of a tire failure analyst.
On July 6, 1993, the right rear tire of a minivan driven by Patrick Carmichael blew out. One passenger died, and others were severely injured. The Carmichaels sued the tire's maker and its distributor, which the opinion calls Kumho Tire, and relied on Dennis Carlson, Jr., an expert in tire failure analysis. The district court did not doubt his qualifications, which included a master's degree in mechanical engineering and 10 years at Michelin America.
Carlson's conclusion that a defect caused the tread to separate rested on a visual and tactile inspection. He testified that a separation without at least two of four signs of abuse pointed to a defect. The four signs were greater tread wear on the shoulder, grooves caused by the beads, discolored sidewalls and marks on the rim flange. The tire was made in 1988. Carlson conceded that some of the tread had worn bald and that the tire should have been taken out of service. He also conceded that it had at least two punctures, inadequately repaired.
The district court excluded Carlson's testimony, and the Eleventh Circuit reversed on the ground that "the district court erred as a matter of law by applying Daubert in this case." Daubert v. Merrell Dow Pharmaceuticals, decided on June 28, 1993, concerned claims that birth defects had been caused by the drug Bendectin, and it dealt with scientific testimony.
In Kumho Tire, Justice Breyer wrote for the Supreme Court that the gatekeeping duty "applies to all expert testimony," including testimony based on "technical" and "other specialized" knowledge. The Daubert factors ask whether a method can be and has been tested, whether it has been peer reviewed and published, what its known or potential rate of error is, which standards control its operation and whether it is generally accepted. Those factors "may or may not be pertinent," and the trial judge has latitude in deciding how to test an expert's reliability.
Justice Breyer described the aim of the screening as making sure that the expert employs "in the courtroom the same level of intellectual rigor that characterizes the practice of an expert in the relevant field." He noted that no one had argued that Carlson, "were he still working for Michelin, would have concluded in a report to his employer that a similar tire was similarly defective" on the grounds he used in the lawsuit.
The Court held that the district court had not abused its discretion when it excluded Carlson's testimony, and reversed the judgment of the Eleventh Circuit.
What has Rule 702 required since December 1, 2023?
The party offering the expert must convince the judge that it is more likely than not that the expert's knowledge will help the jury, the basis is sufficient, the method is reliable and the method was reliably applied.
The Supreme Court order of April 24, 2023 amended Rules 106, 615 and 702 of the Federal Rules of Evidence. The amendments took effect on December 1, 2023. They govern proceedings commenced after that date and, "insofar as just and practicable, all proceedings then pending."
Under the first sentence of the amended rule, the burden is on the party that calls the expert: the court must find it "more likely than not" that each condition is met.
The Advisory Committee note states that the amendment "clarifies that the preponderance standard applies to the three reliability-based requirements added in 2000." Those are sufficient facts or data, reliable principles and methods, and their reliable application to the case. The Committee also wrote that "many courts have held that the critical questions of the sufficiency of an expert's basis, and the application of the expert's methodology, are questions of weight and not admissibility. These rulings are an incorrect application of Rules 702 and 104(a)."
Subdivision (d) was amended as well. In the note's words, "each expert opinion must stay within the bounds of what can be concluded from a reliable application of the expert's basis and methodology."
Do state courts apply the same test?
State courts apply their own rules of evidence. Florida's section 90.702 contains the three reliability conditions that federal Rule 702 has had since 2000, and its text does not contain the 2023 phrase "more likely than not."
Under section 90.702 of the Florida Statutes, 2026 edition, when scientific, technical or other specialized knowledge will assist the trier of fact, a qualified expert may testify if the testimony is based on sufficient facts or data, is the product of reliable principles and methods, and the witness has applied those principles and methods reliably to the facts of the case. The history note names chapter 2013-107, Laws of Florida, as the last amendment.
Ohio's product liability statute also covers the case in which the product is gone. Under Ohio Revised Code 2307.73(B), if the claimant cannot prove the defect by direct evidence because the product was destroyed, "it shall be sufficient for the claimant to present circumstantial or other competent evidence that establishes, by a preponderance of the evidence," that the product was defective in one of the four ways the statute lists. In that situation the engineer's material is photographs, records, exemplar units and whatever remains of the product.
How does the expert get access to the product?
Through a request under Rule 34 of the Federal Rules of Civil Procedure. A party may ask another party to let it inspect, test or sample designated tangible things, and the other party answers in writing within 30 days.
Under Rule 34(a)(1)(B), a party may serve on any other party a request to "inspect, copy, test, or sample" designated tangible things in that party's "possession, custody, or control." The request must describe each item "with reasonable particularity" and must "specify a reasonable time, place, and manner for the inspection and for performing the related acts." The written response is due within 30 days after service, unless the parties stipulate to another time under Rule 29 or the court orders one.
Testing and sampling were added to the rule in 1970. The Advisory Committee note of that year gave a machine as its example: "If the operation of a particular machine is the basis of a claim for negligent injury, it will often be necessary to test its operating parts or to sample and test the products it is producing."
When the product is held by someone who is not a party, Rule 34(c) refers to Rule 45. Under Rule 45(a)(1)(A)(iii), a subpoena may command a person to "produce designated documents, electronically stored information, or tangible things" at a specified time and place. The party or attorney responsible for issuing and serving the subpoena "must take reasonable steps to avoid imposing undue burden or expense" on that person, under Rule 45(d)(1).
A test that cuts a weld or dissolves a coating cannot be repeated on the same piece, and if the parties cannot agree on such a test, the party asked to produce the product may move for a protective order under Rule 26(c)(1)(B) "specifying terms, including time and place or the allocation of expenses."
What must the expert's report contain?
A retained expert's written report, signed by the expert, states every opinion with its basis, the facts or data considered, exhibits, qualifications with publications from 10 years, testimony from 4 years and the compensation.
Under Rule 26(a)(2)(B), a witness "retained or specially employed to provide expert testimony in the case" prepares and signs a written report. It contains a complete statement of all opinions the witness will express and the basis and reasons for them, the facts or data the witness considered, and any exhibits that will summarize or support the opinions. The second half of the report is about the expert. It gives the qualifications, "including a list of all publications authored in the previous 10 years," a list of all other cases in which the witness testified as an expert at trial or by deposition during the previous 4 years, and a statement of the compensation for the study and testimony in the case.
Absent a stipulation or a court order, the disclosure is due at least 90 days before the date set for trial. A report meant only to contradict or rebut the other side's expert is due within 30 days after that side's disclosure.
The other side may depose the expert only after the report is provided, under Rule 26(b)(4)(A). Under Rule 30(d)(1), a deposition is limited to 1 day of 7 hours unless the parties stipulate or the court orders otherwise. Unless manifest injustice would result, Rule 26(b)(4)(E) requires the party seeking discovery to pay the expert a reasonable fee for the time spent.
Drafts of the report are protected under Rule 26(b)(4)(B), and communications between the attorney and the expert are protected under Rule 26(b)(4)(C), except communications about compensation, facts or data the attorney provided and the expert considered, and assumptions the attorney provided and the expert relied on.
What does IAE do in a product liability case?
IAE searches for an independent engineer or safety specialist for the case. Within 5 business days the firm receives 2-3 candidates with CVs, hourly rates and lists of prior testimony. The search fee is $2,000.
The IAE expert witness page lists engineers and safety specialists for design and manufacturing defects, warnings and instructions. A request names the field of expertise, the case type, the state and court, the firm's side, the expert disclosure deadline and the parties with their counsel. For a product case the case type is "Product liability," and the short description states the product and the alleged defect: design, manufacture or warning.
Within 1 business day IAE replies whether it can search in that field by that deadline. Candidate names and CVs come after the $2,000 search fee is paid in advance.
Each candidate confirms in writing that he or she has no ties to the parties or their counsel. For each candidate the firm receives a CV, hourly rates, testimony in the last 4 years and publications in the last 10 years, the lists that Rule 26(a)(2)(B) requires. If no candidate fits, the second search is free. If IAE finds no candidates, it refunds the fee.
The firm chooses the expert, and the expert bills the firm directly or through IAE under the agency option for hours at the expert's rate plus $100 per hour, for fixed fees, minimum charges and surcharges plus 40%, and for expenses at cost. The expert's hourly rate never depends on the outcome of the case or on the content of testimony. IAE is not a law firm. Case strategy and the decision to retain an expert stay with the attorney, and the request form asks firms not to include privileged or sealed information.
Sources
- Kumho Tire Co. v. Carmichael, No. 97-1709, decided March 23, 1999, opinion of the Court (LII, Cornell Law School)
- Daubert v. Merrell Dow Pharmaceuticals, Inc., 509 U.S. 579 (1993), opinion of the Court (LII, Cornell Law School)
- Federal Rule of Evidence 702, Testimony by Expert Witnesses, with Committee Notes
- Supreme Court of the United States, order amending the Federal Rules of Evidence, April 24, 2023
- Federal Rule of Civil Procedure 34, Producing Documents, Electronically Stored Information, and Tangible Things, or Entering onto Land, for Inspection and Other Purposes
- Federal Rule of Civil Procedure 45, Subpoena
- Federal Rule of Civil Procedure 26, Duty to Disclose; General Provisions Governing Discovery
- Federal Rule of Civil Procedure 30, Depositions by Oral Examination
- Ohio Revised Code 2307.73, Liability of manufacturer, enterprise liability rejected
- Ohio Revised Code 2307.74, Product defective in manufacture or construction
- Ohio Revised Code 2307.75, Product defective in design or formulation
- Florida Statutes 90.702, Testimony by experts (2026)
Read also
All articles
State of the art defense in product liability: what must the manufacturer's expert prove about the technology available when the product was made?
The state of the art defense asks what a manufacturer could have known and built on the day the product left its hands, not on the day of the injury
Toy injury expert witness: small parts, age grading and ASTM F963 in a children's product case
A toy injury case usually turns on a short list of questions: was the toy meant for a child under three, did any part fit inside the federal small
Machine guarding expert witness: what does the engineer examine when a worker is hurt by an unguarded machine?
When a worker is hurt at the point of operation of a machine, the case usually turns on the guard: how the machine was designed to keep hands outExpert witnesses
Need an expert witness for your case?
Describe the question, the case type and the court. Within 5 business days you receive 2-3 candidates with CVs, hourly rates and lists of prior testimony.

